Fluid Pump: Specifications

SERVICE SPECIFICATIONS
Body Clearance:
Standard 0.07-0.15 mm (0.0028-0.0059 inch)
Maximum 0.3 mm (0.012 inch)
Tip Clearance:
Standard 0.11-0.14 mm (0.0043-0.0055 inch)
Maximum 0.3 mm (0.012 inch)
Side clearance:
Standard 0.02-0.05 mm (0.0008-0.0020 inch)
Maximum 0.1 mm (0.004 inch)
Pump Body Bushing Inside Diameter:
Front Side (Maximum) 21.58 mm (0.8496 inch)
Rear Side (Maximum) 27.08 mm (1.0661 inch)

TORQUE SPECIFICATIONS
Oil Pump To Transmission Case 21 N.m (16 ft. lbs.)
Oil Pump Body To Stater Shaft 10 N.m (84 inch lbs.)