No. 1 Ignition Coil

1. REMOVE BATTERY CLAMP COVER
2. REMOVE BATTERY AND BATTERY TRAY





3. DISCONNECT IGNITION COIL CONNECTOR
4. DISCONNECT HIGH-TENSION CORD
5. DISCONNECT NOISE FILTER CONNECTOR





6. REMOVE IGNITION COIL
(a) Remove the 2 bolts, ignition coil and bracket.

Torque:
10 mm head
7.5 N.m (80 kgf.cm, 69 in.lbf)
14 mm head
34 N.m (350 kgf.cm, 25 ft.lbf)

(b) Remove the 4 screws and ignition coil from the bracket.

NO.1 IGNITION COIL INSTALLATION
Installation is in the reverse order of removal.