Rear

Fig. 50 Removing Lug Bolt:

REPLACEMENT
1. Remove rear wheel.
2. Remove rear brake caliper and brake disc.
3. Remove hub bolt using SST 09628 - 10011, remove the hub bolt.

Fig. 51 Installing Lug Bolt:

4. Install hub bolt. Install washer and nut to the hub bolt as shown in the illustration, and install the hub bolt with torquing the nut.
5. Install rear brake disc and brake caliper.
6. Install rear wheel, torque to 103 Nm (76 ft. lbs.) and lower vehicle.