Canada Vehicles

COMBINATION SWITCH INSPECTION








1. INSPECT LIGHT CONTROL SWITCH CONTINUITY
If continuity is not as specified, replace the switch.








2. INSPECT FOG LIGHT SWITCH CONTINUITY
If continuity is not as specified, replace the switch.








3. INSPECT HEADLIGHT DIMMER SWITCH CONTINUITY
If continuity is not as specified. replace the switch.








4. INSPECT TURN SIGNAL SWITCH CONTINUITY
If continuity is not as specified, replace the switch.





INSPECT SWITCH CIRCUIT
a. Disconnect the light control switch and daytime running light relay connectors, and inspect the each connector on the wire harness side, as shown.





Light Control Switch Circuit





Dimmer Switch Circuit
If the circuit is not as specified, inspect the wire harness.





b. Connect the wire harness side connector to the light control switch and inspect the connector from the back side, as shown.





Fog Light Switch Circuit





Turn Signal Switch Circuit
If the circuit is not as specified, inspect the circuits connected to other parts.