Installation

RH EXHAUST MANIFOLD




1. Place a new gasket on the cylinder head with the white painted marks facing the manifold side.
NOTE: Be careful of the installation direction.




2. Install the exhaust manifold with eight new nuts, uniformly tighten the nuts in several passes to 44 Nm (450 kg.cm, 32 ft.lb).
3. Install the heat insulator with the three bolts.

LH EXHAUST MANIFOLD




1. Place a new gasket on the cylinder head with the white painted marks facing the manifold side.
NOTE: Be careful of the installation direction.




2. Install the exhaust manifold with eight new nuts, uniformly tighten the nuts in several passes to 44 Nm (450 kg.cm, 32 ft.lb).
3. Install the heat insulator with the three bolts.