Crankshaft Main Bearing: Application and ID

If using a standard bearing, replace it with or having the same number.






If the number of the bearing, cannot be determined, select the correct bearing by adding together the numbers imprinted on the cylinder block and crankshaft, then refer to the table below for the appropriate bearing number. There are five sizes of the standard bearings. For No.1 and No.5 position bearings, use bearings marked "3" "4" "5" "6" and "7 . For others position bearings, use bearings marked "1", "2", "3", "4" and "5".

Reference Cylinder block main journal bore diameter (A):
Mark "00" 72.000 mm (2.8346 in)
Mark "01" 72.001 mm (2.8347 in)
Mark "02" 72.002 mm (2.8347 in)
Mark "03" 72.003 mm (2.8348 in)
Mark "04" 72.004 mm (2.8348 in)
Mark "05" 72.005 mm (2.8348 in)
Mark "06" 72.006 mm (2.8349 in)
Mark "07" 72.007 mm (2.8349 in)
Mark "08" 72.008 mm (2.8350 in)
Mark "09" 72.009 mm (2.8350 in)
Mark "10" 72.010 mm (2.8350 in)
Mark "11" 72.011 mm (2.8351 in)
Mark "12" 72.012 mm (2.8351 in)
Mark "13" 72.013 mm (2.8352 in)
Mark "14" 72.014 mm (2.8352 in)
Mark "15" 72.015 mm (2.8352 in)
Mark "16" 72.016 mm (2.8353 in)

Crankshaft main journal diameter (B):
Mark "00" 67.000 mm (2.6378 in)
Mark "01" 66.999 mm (2.6378 in)
Mark "02" 66.998 mm (2.6377 in)
Mark "03" 66.997 mm (2.6377 in)
Mark "04" 66.996 mm (2.6376 in)
Mark "05" 66.995 mm (2.6376 in)
Mark "06" 66.994 mm (2.6376 in)
Mark "07" 66.993 mm (2.6375 in)
Mark "08" 66.992 mm (2.6375 in)
Mark "09" 66.991 mm (2.6374 in)
Mark "10" 66.990 mm (2.6374 in)
Mark "11" 66.989 mm (2.6374 in)
Mark "12" 66.988 mm (2.6979 in)



Standard bearing center wall thickness:
No.1 and No.5
Mark "3" 2.492-2.495 mm (0.0981-0.0982 in)
Mark "4" 2.495-2.498 mm (0.0982-0.0983 in)
Mark "5" 2.498-2.501 mm (0.0983-0.0985 in)
Mark "6" 2.501-2.504 mm (0.0985-0.0986 in)
Mark "7" 2.504-2.507 mm (0.0986-0.0987 in)

Others
Mark "1" 2.486-2.489 mm (0.0979-0.0980 in)
Mark "2" 2.489-2.492 mm (0.0980-0.0981 in)
Mark "3" 2.492-2.495 mm (0.0981-0.0982 in)
Mark "4" 2.495-2.498 mm (0.0982-0.0983 in)
Mark "5" 2.498-2.501 mm (0.0983-0.0985 in)