Clearing Trouble Codes

1. Using SST, connect terminals Tc and E1 of DLC2 or DLC1 and remove the short pin from DLC1.
SST 09843- 18020
2. IG switch ON.
3. Clear the DTC stored in Electronic Control Unit (ECU) by depressing the Brake Pedal 8 or more times within 5 seconds.

NOTE: In this case, Traction Control (TRAC) DTC are cleared.

4. Check that the warning light shows the normal code.
5. Remove the SST from the terminals of DLC2 or DLC1.
SST 09843-18020

Connecting Short Pin To DLC1:

6. Connect the short pin to DLC1.

NOTE: Disconnecting the battery cable during repairs will not erase the DTC in the ECU.