Programming and Relearning

REGISTRATION OF RECOGNITION CODE
A maximum of 4 recognition codes can be registered using the following 3 modes.
1. Reprogram Mode: Currently registered codes are all erased and only the new recognition codes are registered.
2. Addition Mode: Currently registered codes are retained, and new recognition codes are also registered.
If the number of registered codes exceeds 4, previously registered codes are erased in order, starting from the the oldest code.
3. Confirmation Mode: The number of codes that are currently registered can be confirmed.
4. Errors Mode: All the registered codes are erased. (The wireless door lock function is annulled.) Register the recognition codes according to the following flow chart.

HINT:





*1. Lock Unlock Timing for Manual Switch

*2. Registration Mode: Lock Unlock occurs once automatically





^ Addition Mode: Lock Unlock occurs twice automatically Reprogram
Mode: Lock Unlock occurs twice automatically





^ Confirmation Mode: Lock Unlock occurs automatically the same number of times as the number of codes recorded. (If there are no registered codes, Lock Unlock occurs 5 times.





^ Erase Mode: Lock Unlock occurs 5 times automatically.

*3. Reception OK Response
^ When the transmission from the transmitter is received. lock-> unlock automatically occurs once.
^ When the transmission from the transmitter is not received, there is no response.
*4. Registration OK or NG response
^ Registration OK: Lock -> Unlock automatically occurs once.
^ Registration NG: Lock -> Unlock automatically occurs twice.
Addition Mode:
Registration NG occurs when the code received the first and second time do not match, or when the transmitted code is already registered.
Reprogram Mode:
Registration NG occurs when the code received the first and second time do not match.
*5. Completion Conditions
Normal Mode is restored when any of the following conditions is fulfilled.
1. 20 seconds elapses since Registration OK or NG response.
2. A door is closed.
3. The ignition key is inserted in the key cylinder.
4. During one period in Registration Mode, 4 different codes are registered.
*6. If the required conditions are not met during registration Mode, Normal Mode is resumed.