Front Steering Knuckle

TIGHTENING SPECIFICATIONS
Front
ABS Speed Sensor 7.8 Nm (69 in.lbs.)
ABS Wire harness Clamp 7.8 Nm (69 in.lbs.)
Caliper To Knuckle 107 Nm (79 ft.lbs.)
Dust Cover 8.3 Nm (74 in.lbs.)
Shock Absorber Mounting Nuts 211 Nm (156 ft.lbs.)
Tie Rod To Knuckle 49 Nm (36 ft.lbs.)

Rear
ABS Speed Sensor 7.8 Nm (69 in.lbs.)
Axle Hub 80 Nm (59 ft.lbs.)
Carrier Mounting Hardware:
Bolt 113 Nm (83 ft.lbs.)
Nut A:
Reused Nut 196 Nm (145 ft.lbs.)
New Nut 255 Nm (188 ft.lbs.)
Nut B 181 Nm (134 ft.lbs.)
Caliper To Carrier 47 Nm (34 ft.lbs.)