Transmission Speed Sensor: Service and Repair

DIRECT CLUTCH SPEED SENSOR ON-VEHICLE REPLACEMENT






1. Disconnect direct clutch speed sensor connector.
2. Remove direct clutch speed sensor.
a. Remove the bolt and direct clutch speed sensor.





b. Remove the O-ring from direct clutch speed sensor.
3. Install direct clutch speed sensor.
a. Coat a new O-ring with ATF and install it to the direct clutch speed sensor.
b. Install the direct clutch speed sensor with the bolt.
Torque: 5.4 N.m (55 kgf-cm, 48 inch lbs.)