Evaporator Core: Testing and Inspection

INSPECTION
1. CHECK EVAPORATOR FINS FOR BLOCKAGE
If the fins are clogged, clean them with compressed air.

NOTE: Never use water to clean the evaporator.

2. CHECK FITTINGS FOR CRACKS OR SCRATCHES
Repair as necessary.

INSTALLATION
Installation is in the reverse order of removal.

INSTALLATION HINT: Lubricate 2 new O-rings with compressor oil and install the tubes.

INSTALLATION HINT: If evaporator was replaced, add compressor oil to compressor.

Add 40 cc (1.4 fl.oz.)
Compressor oil:
NO-OIL 8 or equivalent