Cooling System: Specifications

TIGHTENING SPECIFICATIONS
Coolant Outlet To Intake Manifold 15 Nm (11 ft.lb)
Coolant Seal Plate To Cylinder Block 18 Nm (13 ft.lb)
Coolant Inlet Housing To Cylinder Block 8 Nm (69 in.lb)
Coolant Inlet To Coolant Inlet Housing 8 Nm (69 in.lb)
RH engine drain plug on EGR cooler 7 Nm (61 in.lb)
LH engine drain plug on union 13 Nm (115 in.lb)