Power Door Lock Switch: Testing and Inspection

LOCATION

INSPECTION







1. INSPECT DRIVER'S DOOR LOCK CONTROL SWITCH CONTINUITY
Master Switch:
If continuity is not as specified, replace the switch.







2. INSPECT DRIVER'S DOOR LOCK CONTROL SWITCH CIRCUIT
Master Switch:
Disconnect the connector from the switch and inspect the connector on the wire harness side, as shown.
If the circuit is not as specified, inspect the circuits connected to other parts.







3. INSPECT PASSENGER'S DOOR LOCK CONTROL SWITCH CONTINUITY
If continuity is not as specified, replace the switch.







4. INSPECT PASSENGER'S DOOR LOCK CONTROL SWITCH CIRCUIT
Disconnect the connector from the switch and inspect the connector on the wire harness side, as shown.
If the circuit is not as specified, inspect the circuits connected to other parts.







5. INSPECT DOOR KEY LOCK AND UNLOCK SWITCH CONTINUITY
If continuity is not as specified, replace the switch.







6. INSPECT DOOR KEY LOCK AND UNLOCK SWITCH CIRCUIT
Disconnect the connector from the switch and inspect the connector on the wire harness side, as shown.
If the circuit is not as specified, inspect the circuits connected to other parts.







7. INSPECT DOOR UNLOCK DETECTION SWITCH CONTINUITY
If continuity is not as specified, replace the switch.