O/D Direct Clutch Speed Sensor Replacement

1. DISCONNECT O/D DIRECT CLUTCH SPEED SENSOR CONNECTOR.
2. REMOVE O/D DIRECT CLUTCH SPEED SENSOR.
- Remove the bolt and O/D direct clutch speed sensor.
- Remove the O-ring from the O/D direct clutch speed sensor.
3. INSTALL O/D DIRECT CLUTCH SPEED SENSOR.
- Coat a new O-ring with ATF and install it to the O/D direct clutch speed sensor.
- Install the O/D direct clutch speed sensor to the transmission case LH side and torque the bolt.

Torque: 5.4N.m (55 kgf.cm, 48 in..lb.)

4. CONNECT O/D DIRECT CLUTCH SPEED SENSOR CONNECTOR.