Radiator Cooling Fan Motor: Service and Repair

1. On models with air bag system, disarm airbag system as outlined under Technician Safety Information.
2. Drain engine coolant into suitable container, then disconnect pressure hose from hydraulic motor.
3. Remove cruise control actuator cover, then disconnect upper radiator hose, engine coolant reservoir hose and hydraulic motor return hose.
4. Remove hydraulic fan retaining bolts, then hydraulic fan.
5. Remove cooling fan from hydraulic motor, then motor from fan shroud.
6. Reverse procedure to install. Bleed system as outlined under Hydraulic System Bleeding.