Speed Sensor, Rear

REAR SPEED SENSOR

REMOVAL

1. Remove Speed Sensor.
(a) Remove the seat cushion and side seatback.

Rear Speed Sensor Connector:

(b) Disconnect the Speed Sensor connector, and pull out the sensor wire harness with the grommet.
2. Remove Speed Sensor.

Rear Speed Sensor Removal:

(a) Remove the 2 clamp bolts holding the sensor wire harness to the body and Shock Absorber.
Torque: 5.5 Nm (56 kg.cm, 49 inch lbs.)
(b) Remove the Speed Sensor from the Axle Carrier.
Torque: 7.8 Nm (80 kg.cm, 69 inch lbs.)

INSTALLATION
Installation is in the reverse order of removal.

NOTE: After installation, check Speed Sensor signal.