120000 MI or 192000 KM

Inspect/Adjust
    Valve Clearance
      Check clearances and adjust if necessary.
    Drive Belt
      Check for cracks, wear and fluid contamination. Adjust tension if necessary.
Check
    Vehicle
      While driving the vehicle, check the proper operation of the engine, transmission, brakes and steering. Check for abnormal noises or vibrations from any part of the vehicle. General body check.
Tighten/Torque
    Body and Frame
      Check and retorque nuts and bolts on body and chassis.
Inspect
    Steering Gear Housing
      Inspect steering gear housing oil, and check for leakage.
    Steering
      Check linkages for wear and damage. Inspect boots for damage.
    Fuel Supply Line
      Inspect fuel lines and connections, Fuel Tank vapor Vent System Hoses for cracks or leaks. Check Fuel Tank Band for corrosion and damage.
    Fluid - M/T
    Fluid - Differential
      Check oil level and condition.
    Fluid - A/T
      Check oil level and condition.
    Exhaust System
      Check for cracks, corrosion and leakage. Check heat shields for debris.
    Evaporative Emission Control Canister
      Check canister and verify system function. Check evap hoses and connections.
    Constant Velocity Joint Boot
      Check boots for leaks and damage. Retorque flange bolts.
    Brakes and Traction Control
      Inspect the vehicles brake linings and discs/drums. Check parking brake operation and brake pedal free-play.
    Ball Joint
      Inspect ball joints and dust covers for looseness, cracks, and damage.
Replace
    Spark Plug
      Replace with correct type and gap according to manufacturers specification.
    Oil Filter, Engine
    Fuel Filler Cap
      Replace filler cap gasket. Inspect filler neck for damage.
    Engine Oil
    Brake Fluid
      Flush and bleed system. Check for leaks.
    Air Filter Element
Rotate
    Tires
      Recommended, but not required. Check tires for damage, debris and uneven wear. Adjust pressures as needed.