P0420

DTC P0420 - Catalyst System Efficiency Below Threshold (Bank 1)
DTC P0430 - Catalyst System Efficiency Below Threshold (Bank 2)

CIRCUIT DESCRIPTION
The Engine Control Module (ECM) compares the waveform of the oxygen sensor located before the catalyst with the waveform of the oxygen sensor located after the catalyst to determine whether or not catalyst performance has deteriorated.



Air-fuel ratio feedback compensation keeps the waveform of the oxygen sensor before the catalyst repeatedly changing back and forth from rich to lean. If the catalyst is functioning normally, the waveform of the oxygen sensor after the catalyst switches back and forth between rich and lean much more slowly than the waveform of the oxygen sensor before the catalyst.
But when both waveforms change at a similar rate, it indicates that catalyst performance has deteriorated.






SYSTEM CHECK DRIVING PATTERN



HINT: If a malfunction exists, the Malfunction Indicator Lamp (MIL) will light up during step (3).

INSPECTION PROCEDURE