Ignition Relay: Testing and Inspection

IGNITION MAIN RELAY INSPECTION
1. REMOVE IGNITION MAIN RELAY.




2. INSPECT IGNITION MAIN RELAY.
- Inspect relay continuity
- Using an ohmmeter, check that there is continuity between terminals 1 and 2.
- Check that there is no continuity between terminals 3 and 5.
- If continuity is not as specified, replace the relay.




- Inspect relay operation.
- Apply battery voltage across terminals 1 and 2.
- Using an ohmmeter, check that there is continuity between terminals 3 and 5.
- If operation is not as specified, replace the relay.

3. REINSTALL IGNITION MAIN RELAY.