Transmission Speed Sensor: Service and Repair

DIRECT CLUTCH SPEED SENSOR REPLACEMENT




1. DISCONNECT DIRECT CLUTCH SPEED SENSOR CONNECTOR
2. REMOVE DIRECT CLUTCH SPEED SENSOR
- Remove the bolt and direct clutch speed sensor.




- Remove the 0-ring from direct clutch speed sensor.
- Inspect the direct clutch speed sensor.
3. INSTALL DIRECT CLUTCH SPEED SENSOR
- Coat a new 0-ring with ATF and install it to the direct clutch speed sensor.
- Install the direct clutch speed sensor and torque the bolt.

Torque: 5.4 N.m (48 in lb)