Service Hints
C 7 CRUISE CONTROL ACTUATOR1-3: Approx. 2 K Ohms
5-4: Approx. 38.5 Ohms
C15 CRUISE CONTROL SW [COMB. SW]
15-6: Continuity with Main SW ON
5-6: Approx. 420 Ohms with Cancel SW ON
Approx. 70 Ohms with Resume/Accel SW ON
Approx. 200 Ohms with Set/Coast SW ON
C20 CRUISE CONTROL ECU
14-Ground: Approx. 12 Volts with Ignition SW at ON position
15-Ground: Always Approx. 12 Volts
3-Ground: Continuity with parking brake lever pulled up (One Of The Cancel SW)
20-Ground: 4 Pulse with 1 rotation of rotor shaft
18-Ground: Approx. 420 Ohms with cancel SW ON in Control SW
Approx. 200 Ohms with Set/Coast SW ON in Control SW
Approx. 70 Ohms with Resume/Accel SW ON in Control SW
13-Ground: Always Continuity