Air Bag Harness: Service and Repair

REPLACEMENT REQUIREMENTS
In the following cases, replace the wire harness or connector.
- If any part of the SRS wire harness or any connector has been found to be faulty in troubleshooting.
- If any part of the SRS wire harness or any connector has been found to be faulty during the check in items 2-(b) or (c).

NOTICE:
- If the wire harness used in the SRS is damaged, replace the whole wire harness assembly.
- When the connector to the front airbag sensors can be repaired alone (when there is no damaged to the wire harness), use the repair wire specially designed for the purpose.