With Air Suspension

For inspection locations, refer to Figs. 14 and 15.








1. To measure height, turn LRC switch to NORM position and bounce vehicle several times.
2. Place gear selector in Neutral and release parking brake. Block the drive wheels.
3. Start the engine and set LRC to HIGH. Wait one minute, then set switch to NORM, wait one more minute. Repeat this procedure once more then check ride height as follows:
a. On 1993-94 models, front ride height should be 9.80 inches ± 0.039 inch. Rear ride height for should be 9.11 inches ± 0.039 inch.
b. On 1995-96 models, front ride height should be 10.39 inches ± 0.39 inch. Rear ride height should be 9.84 inches ± 0.39 inch.
4. If vehicle ride height is not within specifications, adjust by turning height control sensor link.