Service Hints

C 7 CRUISE CONTROL ACTUATOR
1-3: Approx. 2 K Ohms
5-4: Approx. 38.5 Ohms

C15 CRUISE CONTROL SW [COMB. SW]
15-17: Continuity with Main SW ON
5-17: Approx. 420 Ohms with cancel SW ON
Approx. 70 Ohms with Resume/Accel SW ON
Approx. 200 Ohms with Set/Coast SW ON

C17-B, C18-A CRUISE CONTROL ECU
A-1-GROUND: Approx. 12 Volts with Ignition SW at ON position
A-2, 6-GROUND: Always approx. 12 Volts
A-5-GROUND: Continuity with parking brake pedal depressed (one of the cancel SW) or brake level warning SW ON
A-7-GROUND: 4 pulse with 1 rotation of rotor shaft
B-8-GROUND: Approx. 420 Ohms with cancel SW ON in control SW
Approx. 70 Ohms with Res/ACC SW ON in control SW
Approx. 200 Ohms with Set/Coast SW ON in control SW
A-9-GROUND: Always continuity