Back Seat Removal and Installation

REAR SEAT REMOVAL
1. REMOVE REAR SEAT CUSHION
Pull up the front portion of the rear seat cushion.
2. REMOVE REAR SEAT INNER BELT






3. REMOVE REAR SEAT BACK
(a) Remove four bolts.
(b) (w/Seat heater)
Disconnect the connectors.
(c) Pull up the seat back to remove it

REAR SEAT INSTALLATION
1. INSTALL REAR SEAT BACK
(a) Push down the rear seal back and install four bolts.
Torque: 18 N.m (185 kgf.cm, 13 ft.lbf)
(b) (w/Seat heater)
Connect the connectors.
2. INSTALL REAR SEAT INNER BELT






3. INSTALL REAR SEAT CUSHION
(a) Insert the seat cushion wire to seat back.
(b) (w/ Seat heater)

Connect the connectors.






HINT : Before installation, confirm the rear seat belts are positioned as shown.

(c) Push down the cushion to install the levers to the body pane.

HINT: Confirm that the seat is installed firmly.