Rear Door: Service and Repair

REAR DOOR COMPONENTS

REAR DOOR DISASSEMBLY

Assembly is in the reverse order of disassembly.

1. REMOVE THESE PARTS:
(a) Inside handle bezel
(b) Arm rest base panel






2. REMOVE DOOR TRIM

HINT: Tape a screwdriver tip before use.

(a) Using the screwdriver, remove the courtesy light and disconnect the connector.
(b) Using the screwdriver, remove the child protector cover.
(c) Remove the 5 screws.
(d) Using the screwdriver, remove the clips and remove the trim by pulling all of the trim up.

HINT: Do not scratch the panel with the screwdriver.