Wheel Stud / Lug Nut: Service and Repair

Fig. 24 Air Suspension ON/OFF Switch:

Fig. 50 Removing Lug Bolt:

Removal
1. On models with air suspension, move height control switch in luggage compartment to Off position, Fig. 24.
2. On all models, raise and support vehicle, then remove wheel and tire assembly.
3. Remove caliper and brake rotor.
4. Using puller tool No. SST 09628-10011 or equivalent, remove hub bolt, Fig. 50.

Fig. 51 Installing Lug Bolt:

Fig. 24 Air Suspension ON/OFF Switch:

Installation
1. Install washer and nut to hub bolt, then pull bolt into place by tightening the nut, Fig. 51.
2. Install brake disc and caliper, then wheel and tire assembly and torque to specification.
3. On models with air suspension, move height control switch in luggage compartment to On position, Fig. 24.