Front

INSPECTION OF FRONT PNEUMATIC CYLINDER
1. INSPECT ROLLING DIAPHRAGM
(a) Lift up the dust cover and check that the rolling diaphragm is not damaged or cracked.

If damage or cracks exist, replace the pneumatic cylinder.

(b) Return the dust cover back to position.





2. INSPECT DAMPING FORCE
(a) Compress and extend the pneumatic cylinder and check that there is no abnormal resistance or unusual operation sounds.

If the pneumatic cylinder is not normal, replace it.





HINT: If air remains inside the pneumatic cylinder, remove the air from the cylinder using a screwdriver, etc. before inspecting the cylinder.





(b) Check that there is a difference in the damping force when the rods are positioned as shown in the diagram.