Stabilizer Bar: Service and Repair

Fig. 15 Exploded View Of Ball Joint, Lower Suspension Arm & Stabilizer Bar Components:

1. Raise and support vehicle.
2. Remove suspension crossmember, Fig. 15.
3. Remove stabilizer bar to lower suspension arm nuts and retainers.
4. Remove stabilizer bar brackets.
5. Remove both engine undercovers.
6. Remove automatic transmission control cable clamp from center mounting member.
7. Support engine and remove engine center mounting member.
8. Remove stabilizer bar from lower suspension arms.
9. Remove retainers and spacers from stabilizer bar.
10. Reverse procedure to install, noting the following:
a. Before tightening stabilizer mounting nuts, stabilize suspension by bouncing vehicle up and down.