Installation

U660F AUTOMATIC TRANSMISSION / TRANSAXLE: SPEED SENSOR: INSTALLATION

1. INSTALL SPEED SENSOR

(a) Coat the 2 bolts with ATF.





(b) Install the speed sensor to the valve body with the 2 bolts.

Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)

(c) Connect the connector.

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY Installation

3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Installation

4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY Installation

5. INSTALL TORQUE CONVERTER CLUTCH ASSEMBLY Installation

6. INSTALL TRANSFER ASSEMBLY Installation

7. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY

HINT
See the steps from "Install Automatic Transaxle Assembly" through "Install Engine Assembly with Transaxle" Installation.