Disassembly

2GR-FE STARTING: STARTER: DISASSEMBLY

1. REMOVE MAGNETIC SWITCH ASSEMBLY

(a) Remove the nut and disconnect the lead wire from the magnetic switch.





(b) Holding the magnetic switch on the repair service starter kit, remove the 2 nuts.





(c) Remove the magnetic switch.

2. REMOVE STARTER YOKE ASSEMBLY

(a) Remove the 2 through-bolts, and pull out the starter yoke together with the commutator end frame.





(b) Remove the starter yoke from the commutator end frame.





3. REMOVE STARTER ARMATURE PLATE

(a) Remove the armature plate from the starter yoke.





4. REMOVE STARTER COMMUTATOR END FRAME COVER

(a) Using a screwdriver, pry out the commutator end frame cover.





5. REMOVE STARTER ARMATURE ASSEMBLY

(a) Using snap ring pliers, remove the snap ring and plate washer.





NOTICE:
Do not drop the starter armature assembly.

Text in Illustration





(b) Remove the armature from the commutator end frame.

6. REMOVE RUBBER SEAL

(a) Remove the rubber seal.





7. REMOVE PLANETARY GEAR

(a) Remove the 3 planetary gears from the repair service starter kit.