Installation

SEAT BELT: REAR CENTER SEAT OUTER BELT ASSEMBLY: INSTALLATION

1. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY

(a) Install the rear center seat outer belt assembly with the bolt and nut.





Bolt - Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)

Nut - Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

2. INSTALL REAR SEAT SHOULDER BELT COVER

(a) Engage the claw and guide, and install the rear seat shoulder belt cover as shown in the illustration.





3. INSTALL BELT SUPPORT PLATE Reassembly

4. INSTALL REAR SEATBACK COVER WITH PAD Reassembly

5. INSTALL REAR SEAT HEADREST SUPPORT LH Reassembly

6. INSTALL REAR SEAT HEADREST SUPPORT RH Reassembly

7. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

(a) Connect the rear center seat outer belt assembly with the bolt.





Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

8. INSTALL REAR SEAT SHOULDER BELT HOLE COVER Reassembly

9. INSTALL SEAT BELT ANCHOR COVER CAP Reassembly

10. INSTALL NO. 1 FOLD SEAT STOPPER BAND ASSEMBLY Reassembly

11. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY RH Reassembly

12. INSTALL REAR SEATBACK COVER RH Reassembly

13. INSTALL TONNEAU COVER HOOK HOLDER Reassembly

14. INSTALL REAR SEAT LOCK STRIKER Reassembly

15. INSTALL REAR SEATBACK LOCK STRIKER PROTECTOR Reassembly

16. INSTALL REAR SEAT CUSHION COVER WITH PAD Reassembly

17. INSTALL REAR SEAT CUSHION MOULDING RH Reassembly

18. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH Reassembly

19. INSTALL REAR SEAT COVER CAP Reassembly

20. INSTALL REAR CENTER SEAT ASSEMBLY Reassembly

21. INSTALL UPPER CENTER SEAT HINGE COVER LH Reassembly

22. INSTALL REAR SEAT INNER BELT ASSEMBLY Installation

23. INSTALL REAR SEAT ASSEMBLY RH

(a) Install the rear seat assembly RH Installation.