FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Removal





2GR-FE FUEL: FUEL PRESSURE REGULATOR: REMOVAL

1. REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE

(a) Remove the fuel suction tube assembly with pump and gauge Removal.

2. REMOVE FUEL SENDER GAUGE ASSEMBLY Removal

3. REMOVE FUEL SUCTION PLATE SUB-ASSEMBLY

(a) Disconnect the fuel pump connector from the fuel suction plate.





NOTICE:
Do not damage the wire harness.

(b) Using needle nozzle pliers, remove the E-ring.





Text in Illustration





(c) Separate the fuel suction plate sub-assembly and remove the spring from the No. 1 fuel sub-tank.





Text in Illustration





NOTICE:
Do not disconnect the tube shown in the illustration when disassembling the fuel suction tube assembly with pump and gauge. Doing so will cause reassembly of the fuel suction tube assembly with pump and gauge to be impossible as the tube is welded to the plate.

(d) Disengage the 2 claws and remove the fuel filter from the No. 1 fuel sub-tank.





(e) Using a screwdriver with the tip taped, disengage the claw of the jet pump nozzle.





(f) Separate the fuel pump filter hose.

(g) Using a screwdriver with the tip taped, remove the fuel pump filter hose.





4. REMOVE FUEL PUMP ASSEMBLY WITH FILTER

(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 5 claws and remove the fuel pump assembly with filter from the fuel filter.





NOTICE:
* Do not damage the fuel filter.
* Do not remove the suction filter.
* Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.

(b) Disconnect the fuel pump connector.





(c) Remove the fuel pump filter seal from the fuel pump. If the fuel pump filter seal still remains in the fuel filter element, remove it using a wire tip (dia1 mm) that is formed as shown in the illustration.





NOTICE:
Be careful not to damage the sealing surfaces.

(d) Remove the fuel pump spacer from the fuel pump.





5. REMOVE NO. 1 FUEL SUCTION SUPPORT

(a) Using a screwdriver with the tip taped, disengage the claw and remove the fuel No. 1 suction support.





6. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY

(a) Remove the pressure regulator from the fuel filter.





(b) Remove the 2 O-rings from the fuel pressure regulator.





Text in Illustration