Installation

LIGHTING (EXT): HEIGHT CONTROL SENSOR: INSTALLATION

1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

(a) Install the rear height control sensor sub-assembly with the 2 nuts.





Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

(b) Engage the guide and install the bolt.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(c) Engage the guide and install the bolt.





Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

(d) Connect the connector.

2. INSTALL REAR WHEEL Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. HEIGHT CONTROL SENSOR SIGNAL INITIALIZATION

Initialization

5. ADJUST HEADLIGHT AIMING

Adjustments