Installation

PARK ASSIST / MONITORING: CLEARANCE WARNING BUZZER: INSTALLATION

1. INSTALL CLEARANCE WARNING BUZZER

(a) Engage the clamp to install the clearance warning buzzer.





(b) Connect the connector.

2. INSTALL RADIO RECEIVER ASSEMBLY WITH REGISTER Installation

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL Installation

4. INSTALL INSTRUMENT PANEL FINISH PANEL Installation

5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

6. INSTALL NO. 1 SWITCH HOLE BASE Installation

7. INSTALL INSTRUMENT PANEL GARNISH LH Installation

8. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.