Installation

LIGHTING (INT): REAR DOOR COURTESY SWITCH: INSTALLATION

1. INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY

(a) Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the "TORX" bolt.





Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Connect the connector.

2. INSTALL REAR SEAT SIDE COVER Installation

3. INSTALL REAR DOOR SCUFF PLATE Installation

4. INSTALL REAR SEAT ASSEMBLY LH (for LH Side)

HINT
Refer to the procedure from Install Rear Seat Assembly LH Installation.

5. INSTALL REAR SEAT ASSEMBLY RH (for RH Side)

HINT
Refer to the procedure from Install Rear Seat Assembly RH Installation.