Installation

LIGHTING (INT): FRONT DOOR COURTESY SWITCH: INSTALLATION

1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY

(a) Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the "TORX" bolt.





Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Connect the connector.

2. INSTALL LOWER CENTER PILLAR GARNISH Installation

3. INSTALL REAR DOOR SCUFF PLATE Installation

4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY Installation

5. INSTALL FRONT DOOR SCUFF PLATE Installation