Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: SKID CONTROL BUZZER: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable from the negative (-) battery terminal, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE KNEE AIRBAG ASSEMBLY

HINT
Refer to the procedure up to Remove Driver Side Knee Airbag Assembly Removal.

3. REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

HINT
Refer to the procedure up to Remove Instrument Panel Junction Block Assembly Removal.

4. REMOVE SKID CONTROL BUZZER ASSEMBLY

(a) Remove the skid control buzzer clamp.





(b) Disconnect the skid control buzzer connector.