Installation

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: SKID CONTROL BUZZER: INSTALLATION

1. INSTALL SKID CONTROL BUZZER ASSEMBLY

(a) Connect the skid control buzzer connector.





(b) Install the skid control buzzer clamp.





2. INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

HINT
Refer to the procedure up to Install Instrument Panel Junction Block Assembly Installation.

3. INSTALL KNEE AIRBAG ASSEMBLY

HINT
Refer to the procedure up to Install Driver Side Knee Airbag Assembly Installation.

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. INSPECT SRS WARNING LIGHT

HINT
Diagnosis System.