Installation

HEATING / AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SENSOR: INSTALLATION

1. INSTALL NO. 1 COOLER THERMISTOR

(a) Install the No. 1 cooler thermistor as shown in the illustration.









Text in Illustration





NOTICE:
* Be sure to insert the thermistor only once because reinserting it into the same position will not allow it to be firmly secured.
* When reusing the evaporator, insert the thermistor one row next to the one that has been used previously (X in the illustration).
* After inserting the thermistor, do not apply excessive force to the wire.
* Directly insert the thermistor until the edge of plastic case "a" comes into contact with evaporator "b".

2. INSTALL COOLER EVAPORATOR SUB-ASSEMBLY (for TMC Made) Reassembly

3. INSTALL COOLER EVAPORATOR SUB-ASSEMBLY (for TMMC Made) Reassembly

4. INSTALL BLOWER ASSEMBLY (for TMMC Made) Installation

5. INSTALL COOLER EXPANSION VALVE (for TMC Made) Reassembly

6. INSTALL COOLER EXPANSION VALVE (for TMMC Made) Reassembly

7. INSTALL AIR CONDITIONING RADIATOR ASSEMBLY (for TMC Made) Reassembly

8. INSTALL AIR CONDITIONING HARNESS ASSEMBLY (for TMC Made) Reassembly

9. INSTALL AIR CONDITIONING HARNESS ASSEMBLY (for TMMC Made) Reassembly

10. INSTALL NO. 5 AIR DUCT SUB-ASSEMBLY Reassembly

11. INSTALL NO. 3 AIR DUCT SUB-ASSEMBLY Reassembly

12. INSTALL AIR CONDITIONING UNIT ASSEMBLY

HINT
Refer to the procedure for Install Air Conditioning Unit Assembly Installation.