Disassembly

BRAKE SYSTEM (OTHER): BRAKE MASTER CYLINDER: DISASSEMBLY

1. REMOVE BRAKE MASTER CYLINDER TO WAY TUBE

(a) Mount the brake master cylinder sub-assembly in a vise.

NOTICE:
Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

(b) Using a union nut wrench, remove the brake master cylinder to way tube from the No. 2 brake tube way and brake master cylinder body.





2. REMOVE NO. 2 BRAKE TUBE WAY

(a) Remove the No. 2 brake tube way from the brake master cylinder body.

3. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

(a) Mount the brake master cylinder sub-assembly in a vise.





NOTICE:
Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

(b) Using a pin punch and a hammer, tap out the straight pin, and remove the brake master cylinder reservoir sub-assembly.

4. REMOVE MASTER CYLINDER RESERVOIR GROMMET

(a) Remove the 2 master cylinder reservoir grommets from the brake master cylinder reservoir assembly.