Installation

EXTERIOR PANELS / TRIM: NAME PLATE: INSTALLATION

HINT
When installing new name plates, heat the vehicle body and name plates using a heat light.

Heating Temperature





NOTICE:
Do not heat the vehicle body or name plates excessively.

1. INSTALL NO. 1 BACK DOOR NAME PLATE

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove any double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Clean the No. 1 back door name plate (if reusing the No. 1 back door name plate).

(1) Using a heat light, heat the No. 1 back door name plate.

(2) Remove the double-sided tape from the No. 1 back door name plate.

(3) Wipe off any tape adhesive residue with cleaner.

(4) Apply new double-sided tape to the No. 1 back door name plate.

(c) Install the No. 1 back door name plate.

(1) Using a heat light, heat the vehicle body and the No. 1 back door name plate.

(2) Remove the release paper from the No. 1 back door name plate.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the No. 1 back door name plate as shown in the illustration.





Text in Illustration





2. INSTALL NO. 2 BACK DOOR NAME PLATE (w/ Brand Name Plate)

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove any double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Clean the No. 2 back door name plate (if reusing the No. 2 back door name plate).

(1) Using a heat light, heat the No. 2 back door name plate.

(2) Remove the double-sided tape from the No. 2 back door name plate.

(3) Wipe off any tape adhesive residue with cleaner.

(4) Apply new double-sided tape to the No. 2 back door name plate.

(c) Install the No. 2 back door name plate.

(1) Using a heat light, heat the vehicle body and the No. 2 back door name plate.

(2) Remove the release paper from the No. 2 back door name plate.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the No. 2 back door name plate as shown in the illustration.





Standard Measurement





3. INSTALL NO. 3 BACK DOOR NAME PLATE

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove any double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Clean the No. 3 back door name plate (if reusing the No. 3 back door name plate).

(1) Using a heat light, heat the No. 3 back door name plate.

(2) Remove the double-sided tape from the No. 3 back door name plate.

(3) Wipe off any tape adhesive residue with cleaner.

(4) Apply new double-sided tape to the No. 3 back door name plate.

(c) Install the No. 3 back door name plate.

(1) Using a heat light, heat the vehicle body and the No. 3 back door name plate.

(2) Remove the release paper from the No. 3 back door name plate.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the No. 3 back door name plate as shown in the illustration.





Standard Measurement