Installation
AUDIO / VIDEO: STEREO COMPONENT AMPLIFIER: INSTALLATION
1. INSTALL NO. 1 AMPLIFIER BRACKET
(a) Install the No. 1 amplifier bracket with the 2 bolts.
Torque : 4.8 Nm (49 kgf-cm, 43 in-lbf)
2. INSTALL NO. 2 AMPLIFIER BRACKET
(a) Install the No. 2 amplifier bracket with the 2 bolts.
Torque : 4.8 Nm (49 kgf-cm, 43 in-lbf)
3. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET
(a) Install the stereo component amplifier assembly with bracket with the bolt and nut.
Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)
(b) Connect the 4 connectors.
4. INSTALL REAR SEAT SUB FLOOR PANEL ASSEMBLY
(a) Install the rear seat sub floor panel assembly with the 4 bolts.
Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)
(b) Engage the 6 clamps to install the wire harness.
(c) Connect the connector.
5. INSTALL NO. 2 DECK BOARD REINFORCEMENT
(a) Install the No. 2 deck board reinforcement with the 3 bolts.
Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)
6. INSTALL NO. 1 DECK BOARD REINFORCEMENT
(a) Install the No. 1 deck board reinforcement with the 3 bolts.
Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)
7. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH Installation
8. INSTALL RECLINING REMOTE CONTROL BEZEL RH
HINT
Use the same procedure for the RH side and the LH side Installation.
9. INSTALL ROPE HOOK ASSEMBLY (for RH Side)
HINT
Use the same procedure for the RH side and the LH side Installation.
10. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for RH Side) Installation
11. INSTALL REAR SEAT SIDE COVER RH
HINT
Use the same procedure for the RH side and the LH side Installation.
12. INSTALL REAR DOOR SCUFF PLATE RH
HINT
Use the same procedure for the RH side and the LH side Installation.
13. INSTALL REAR SEAT ASSEMBLY RH Installation
14. INSTALL REAR FLOOR FINISH SIDE PLATE RH
HINT
Use the same procedure for the RH side and the LH side Installation.
15. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH Installation
16. INSTALL RECLINING REMOTE CONTROL BEZEL LH Installation
17. INSTALL ROPE HOOK ASSEMBLY (for LH Side) Installation
18. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for LH Side) Installation
19. INSTALL REAR SEAT SIDE COVER LH Installation
20. INSTALL REAR DOOR SCUFF PLATE LH Installation
21. INSTALL REAR SEAT ASSEMBLY LH Installation
22. INSTALL REAR FLOOR FINISH SIDE PLATE LH Installation
23. INSTALL REAR FLOOR FINISH PLATE Installation
24. INSTALL FRONT DECK FLOOR BOX Installation
25. INSTALL DECK SIDE TRIM BOX RH (for Full Size Spare Tire) Installation
26. INSTALL DECK SIDE TRIM BOX RH (for Compact Spare Tire) Installation
27. INSTALL DECK SIDE TRIM BOX LH (for Full Size Spare Tire) Installation
28. INSTALL DECK SIDE TRIM BOX LH (for Compact Spare Tire) Installation
29. INSTALL REAR DECK FLOOR BOX Installation
30. INSTALL TONNEAU COVER ASSEMBLY Installation
31. INSTALL NO. 3 REAR FLOOR BOARD (for Full Size Spare Tire) Installation
32. INSTALL NO. 3 REAR FLOOR BOARD (for Compact Spare Tire) Installation
33. INSTALL NO. 4 REAR FLOOR BOARD (for Full Size Spare Tire) Installation
34. INSTALL NO. 4 REAR FLOOR BOARD (for Compact Spare Tire) Installation
35. INSTALL SPARE WHEEL COVER ASSEMBLY (for Compact Spare Tire) Installation
36. INSTALL DECK BOARD SUB-ASSEMBLY Installation
37. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
38. INSPECT SRS WARNING LIGHT
(a) Inspect SRS warning light Diagnosis System.