Installation
CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): INSTALLATION
1. INSTALL DCM (TELEMATICS TRANSCEIVER)
2. INSTALL NO. 2 TELEPHONE BRACKET
(a) Install the No. 2 telephone bracket with the 2 bolts.
3. INSTALL NO. 1 TELEPHONE BRACKET
(a) Install the No. 1 telephone bracket with the 2 bolts.
4. INSTALL TELEPHONE BRACKET
(a) Install the telephone bracket with the 3 nuts.
5. INSTALL REAR SEAT ENTERTAINMENT ECU ASSEMBLY (w/ Rear Seat Entertainment System)
(a) Install the rear seat entertainment ECU assembly with the 3 nuts.
6. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BRACKET (w/o Rear Seat Entertainment System)
(a) Engage the guide.
(b) Install the DCM (telematics transceiver) with bracket with the 3 bolts.
(c) Connect the 4 connectors.
7. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BRACKET (w/ Rear Seat Entertainment System)
(a) Engage the guide.
(b) Install the DCM (telematics transceiver) with bracket with the 3 bolts.
(c) Connect the 7 connectors.
8. INSTALL CONSOLE BOX Installation
9. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL Installation
10. INSTALL INSTRUMENT PANEL FINISH PANEL Installation
11. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation
12. INSTALL NO. 1 SWITCH HOLE BASE Installation
13. INSTALL INSTRUMENT PANEL GARNISH LH Installation
14. INSTALL REAR CONSOLE BOX ASSEMBLY Installation
15. INSTALL MULTI-MEDIA INTERFACE ECU ASSEMBLY (w/ USB Audio System) Installation
16. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY Installation
17. INSTALL NO. 2 CONSOLE BOX DUCT Installation
18. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation
19. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation
20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
21. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light Diagnosis System.
22. DCM ACTIVATION
HINT
When replacing the DCM (telematics transceiver), perform DCM activation DCM Activation.