Removal

PARK ASSIST / MONITORING: TELEVISION CAMERA (for Front Passenger Side): REMOVAL

1. REMOVE OUTER REAR VIEW MIRROR GLASS Removal

2. REMOVE SIDE TELEVISION CAMERA ASSEMBLY

(a) Remove the 4 screws.

(b) Disengage the 4 claws and disconnect the outer mirror cover with the side turn signal light assembly.

(d) Disconnect the foot light bulb with the bulb socket as shown in the illustration.

(e) Insert a 0.9 mm (0.0354 in.) spark plug gap gauge or similar tool to the side of the claw engagement portion as shown in the illustration, tilt up the claw on the connector and disconnect the camera connector.

Text in Illustration

NOTICE:
* Insert the gauge enough so that the claw becomes the same height as the protrusion of the connector housing. If the gauge is inserted too far, or if the notch on the claw is lifted directly using a screwdriver, the claw may be damaged.
* When the claw on the connector is damaged, replace the luggage door opening switch assembly.

(f) Disengage the connector clamp.

(g) Disengage the claw and remove the foot light unit.

(h) Remove the 3 screws and side television camera assembly.