Transmission Cooler: Service and Repair

REMOVAL
1. REMOVE FRONT RIGHT FENDER LINER





2. DISCONNECT OIL COOLER HOSE
Loosen the 2 clips and disconnect the 2 oil cooler hose.
3. REMOVE OIL COOLER
a. Remove the nut.
Torque: 7.0 Nm (71 kgf-cm, 62 inch lbs.)
b. Remove the 2 bolts and oil cooler assembly.
Torque: 7.0 Nm (71 kgf-cm, 62 inch lbs.)

INSTALLATION
Installation is in the reverse order of removal.

HINT: Fill ATF and cheek the fluid level.