Radiator Cooling Fan Motor: Service and Repair

REMOVAL
1. REMOVE RADIATOR ASSEMBLY





2. REMOVE ELECTRIC COOLING FAN FROM RADIATOR
Remove the 6 bolts and cooling fan.
Torque: 5.0 Nm (50 kgf-cm, 44 inch lbs.)

DISASSEMBLY





1. REMOVE FAN
Remove the nut and fan.





2. REMOVE FAN MOTOR
a. Disconnect the wire and connector holder from the fan shroud.
b. Remove the 3 screws and fan motor.

REASSEMBLY





1. INSTALL FAN MOTOR
a. Install the fan motor with the 3 screws.
b. Install the wire and connector holder to the fan shroud.
2. INSTALL FAN
Install the fan with the nut.

INSTALLATION
Installation is in the reverse order of removal.