Seat Belt Buckle Switch: Testing and Inspection

Driver's Side:
INSPECT SEAT BELT BUCKLE SWITCH CONTINUITY
a. Check that continuity exists between the terminals 2 and 3 on the switch side connector with the switch ON (belt fastened).
b. Check that continuity exists between the terminals 1 and 3 on the switch side connector with the switch OFF (belt unfastened).
If operation is not as specified, replace the switch.




Passenger's Side:
INSPECT SEAT BELT BUCKLE SWITCH CONTINUITY
a. Check that continuity exists between the terminals 1 and 3 on the switch side connector with the switch ON (belt fastened).
b. Check that continuity exists between the terminals 2 and 3 on the switch side connector with the switch OFF (belt unfastened).
If operation is not as specified, replace the switch.

Driver side:
INSPECT SEAT BELT BUCKLE SWITCH CIRCUIT