P1351

P1351 VVT SENSOR/CAMSHAFT POSITION SENSOR CIRCUIT RANGE/PERFORMANCE PROBLEM (BANK 2)

CIRCUIT DESCRIPTION

Detection Item:

Crankshaft position sensor (NE signal) consists of a magnet, iron core and pickup coil.

The NE signal plate has 34 teeth and is installed the crankshaft. The NE signal sensor generates 34 signals at every engine revolution. The ECM detects the standard crankshaft angle based on the G (VV) signal, and the actual crankshaft angle and the engine speed by the NE signal.

Step 1:

INSPECTION PROCEDURE