Camshaft Position Sensor: Testing and Inspection

NOTE: "Cold" and "Hot" in these sentences express the temperature of the coils themselves. "Cold" is from -10 °C (14 °F) to 50 °C (122 °F) and "Hot" is from 50 °C (122 °F) to 100 °C (212 °F).

INSPECT CAMSHAFT POSITION SENSOR
a. Remove the V-bank cover.
b. Remove the battery clamp cover.
c. Remove the air cleaner inlet.
d. Disconnect the camshaft position sensor connector.




e. Using an ohmmeter, measure the resistance between terminals.

Resistance:
cold 835-1,400 Ohms
Hot 1,060-1,645 Ohms

If the resistance is not as specified, replace the camshaft position sensor.

f. Reconnect the camshaft position sensor connector.
g. Reinstall the air cleaner inlet.
h. Reinstall the battery clamp cover.
i. Reinstall the V-bank cover.